Shop Details

There Are no reviews yet.

Trac10286 DC Voltage Current BLE Sensor

Trac10286 DC Voltage Current BLE Sensor is an IPx7 waterproof BLE beacon with analog/digital(AD) input. The BLE is a very low power 2.4G radio that can transmit the beacon information efficiently. Trac10286 DC Voltage Current BLE Sensor supports Bluetooth® Low Energy( BLE) in Bluetooth 5. The typical beacon battery life is over 7 years in default settings. Trac10286 DC Voltage Current BLE Sensor is a rugged design for working in tough conditions. The AD input can also be connected to a NTC thermistor and becomes a temperature sensor.

Add to Wishlist
Availability:In Stock
SKU:Trac10286Categories: , ,
Description

Specification

Absolute Maximum Rating

Supply Power CR2450 battery
Storage Temperature -40º to 85º Celsius

Recommendable Operation Condition

Operating Temperature/ Humidity(main unit) -20º to 75º Celsius

0 to 95% RH( no condensation)

VDD +3V by CR2450 battery
IPx7 30min.@1 Meter water (the wire connection board is not included)

 

Current Consumption

Trac10286 DC Voltage Current BLE Sensor-30s Average: 8.17uA*, in default 30s transmit period.

* Measured with Panasonic CR2450 battery.

Trac10286 DC Voltage Current BLE Sensor-30s > 6 yr*, in default 30s transmit period.

Battery Life Simulation

* Calculated with one CR2450 battery with 600mAH capacity. Considering the battery discharge characteristic, only 80% of capacity is used for calculation.

This value is just for reference and may be varied with component tolerance and different environments.

Analog Input Voltage Specification(for Trac10286 DC Voltage Current BLE Sensor-V model)

Maximum Input Range 0 to 26000 mVDC
Recommendable Input Range 0 to 24000 mVDC
Resolution 10.8mV
Zero Offset 43.2mV( typical)
Accuracy Typical: +-21.6mV

4-20mA Input Current Specification( for Trac10286 DC Voltage Current BLE Sensor-A model)

Maximum Input Range 0 to 25.218mADC
Recommendable Input Range 0 to 23.278mADC
Resolution 0.001mA
Zero Offset 0.1mA(typical)
Accuracy Typical: +-1% of reading

Digital Input Voltage Specification(for Trac10286 DC Voltage Current BLE Sensor-D model)

Maximum Input Range 0 to 50VDC
Digital Input level VinL: < 0.5V VinH: > 2.4V

Optimal NTC Specification(for Trac10286 DC Voltage Current BLE Sensor-NTC model)

Resistance @ 25 oC 10K ohm
B constant (25oC-85oC) 3970(K)
Temperature range -40oC ~ +105oC
Accuracy* Typical: +-0.3oC @25oC

* It’s the accuracy of the Trac10286 DC Voltage Current BLE Sensor. The NTC has its own accuracy and is not included. The wire length will also contribute some error to the accuracy and is not included too.

BLE RF Specification

Transmit Power Max.: +5dBm
Receiver Sensibility -97 dBm @1Mbps, 0.1 %BER
Maximum Received Signal Strength at <0.1% PER +4dBm @1Mbps, 0.1 %BER
Frequency band 2.400 – 2.483 GHz
Frequency Deviation +-350 kHz @1Mbps
Antenna on board PCB antenna
Range >100M in open space

Features

General

  • ARM CortexTM-M3 32-bit processor
  • Support BLE 2 and BLE 5 long range
  • IPx7 waterproof
  • 2M of drop protection
  • Powered with 1XCR2450 battery
  • Long battery life: over 7 year in typical beacon setting(30s)
  • Android APP for configuration
  • Power on/off switch(internal)
  • Main unit Size: 8mm
  • Operating temperature: -20°C to 75°C